[Shamu406]

Can anyone help with the correct part number for the palm valve that opens the air operated generator compartment on a 1996 Newell?
I read another post regarding it showing 3, but just wondering if anyone has had the experience of changing out the right one the first time. 
Here is a pic of mine...    
Thanks!

[HoosierDaddy]

If I remember correctly that model is discontinued. I ordered a Norgren k71DAOO KCO KB1 from ebay. It was exact replacement. It appears they are no longer available from that source. Check item number 393042132943 on ebay. Look up Norgrens web-site for the updated part number. The model info should be on the back side of the valve visible after you remove it. I believe an Airzoe model 4R210-08 will work. It is smaller but functions the same. Available on Amazon

[Shamu406]

I found on Ebay, very close similar part numbers but not exact, not sure if they are correct?
I found - K71DAOO-KS1-KBO (OPEN BOX) - 110.00
And - K71DAOO-KCO-KBO - (USED) - 75.00
[url=https://www.ebay.com/str/mroglobalsolutions?_trksid=p4429486.m3561.l161210][/url]

[Gnawrocki1]

Is that valve rebuildable? Might be easier/faster to rebuild than find a new one/replacement???

[HoosierDaddy]

I rebuilt my original valve. It did not last.

[HoosierDaddy]

I found on Ebay,  very close similar part numbers but not exact, not sure if they are correct?
I found - K71DAOO-KS1-KBO (OPEN BOX) - 110.00
And - K71DAOO-KCO-KBO - (USED) - 75.00
[url=https://www.ebay.com/str/mroglobalsolutions?_trksid=p4429486.m3561.l161210][/url]

https://cdn.norgren.com/pdf/Nugget%20200...anical.pdf

This page may help you determine suitability. The valves are modular. The model designation denoted the modules combined for the end product. ie: KBO indicates palm button.  Have you determined the exact model number that your current valve is?

[Jack Houpe]

I replaced mine with a valve from Amazon, I tried to rebuild the original but it still leaked air.
https://www.amazon.com/gp/product/B07SHG...=UTF8&th=1

[Richard]

And if you want to stay with a palm style. https://www.amazon.com/dp/B07SJCY26Q/ref...GhlbWF0aWM

[Shamu406]

And if you want to stay with a palm style.    https://www.amazon.com/dp/B07SJCY26Q/ref...GhlbWF0aWM

Richard, That one appears smaller that mine? Not sure if it is a direct bolt in unit? Also, did you use a filter before it? Thanks! John

[Richard]

As said in Cool Hank Luke, “what we have here is a failure to communicate”.

You are asking for a direct replacement. The valve you are replacing is a common item in the pneumatic world, and the guys have been giving you different options for replacing the valve.

You may not find a direct replacement for a 25 yr old part. But there are many options available to you that function in exactly the same way.