[Latitude 28]

My Sanden dash air compressor model number has been rubbed of by the clutch wire.  Does anyone happen to know the model number of the Detroit 60 Sanden compressor?    

[encantotom]

i replaced mine some years ago. i will go out in the shop and look. i know i got it at a big truck aircon place. it was used in kenworths

fairly cheap. like 200 bucks or so

tom

[Richard]

Steve,

Make sure when specing compressor that you get one with a clutch pulley that mates with your setup. There are single belt, double V belt, and serpentine setups out there.            

[encantotom]

as with any newell,   yours may or may not be the same.  

tom

[smagown]

Tom, the Sanden is a rotary me thinks.

[encantotom]

looks to be a different config anyway. but why does it matter what type of compressor it is? as long as it is the right mounting and cooling power

tom

[smagown]

Sanden Model U 4626, double pulley

[Latitude 28]

Thanks to all for the responses.  My configuration is like Richards, as I have the serpentine belt.  I can make out Model #48 but the last two numbers are not that clear.  Checking a few suppliers the model number 4822 is configured like mine at a cost of $225 give or take.

[Richard]

Yep 4822 is the label on the serpentine pulley variety.