You are not logged in or registered. Please login or register to use the full functionality of this board...
Newell Gurus
Sanden Compressor Model Number - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Technical Discussions (https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Air Conditioning (https://newellgurus.com/forumdisplay.php?fid=8)
+--- Thread: Sanden Compressor Model Number (/showthread.php?tid=5625)



Sanden Compressor Model Number - Latitude 28 - 08-21-2020

My Sanden dash air compressor model number has been rubbed of by the clutch wire.  Does anyone happen to know the model number of the Detroit 60 Sanden compressor?    


RE: Sanden Compressor Model Number - encantotom - 08-21-2020

i replaced mine some years ago. i will go out in the shop and look. i know i got it at a big truck aircon place. it was used in kenworths

fairly cheap. like 200 bucks or so

tom


RE: Sanden Compressor Model Number - Richard - 08-21-2020

Steve,

Make sure when specing compressor that you get one with a clutch pulley that mates with your setup. There are single belt, double V belt, and serpentine setups out there.            


RE: Sanden Compressor Model Number - encantotom - 08-21-2020

as with any newell,   yours may or may not be the same.  

tom


RE: Sanden Compressor Model Number - smagown - 08-21-2020

Tom, the Sanden is a rotary me thinks.


RE: Sanden Compressor Model Number - encantotom - 08-21-2020

looks to be a different config anyway. but why does it matter what type of compressor it is? as long as it is the right mounting and cooling power

tom


RE: Sanden Compressor Model Number - smagown - 08-22-2020

Sanden Model U 4626, double pulley


RE: Sanden Compressor Model Number - Latitude 28 - 08-22-2020

Thanks to all for the responses.  My configuration is like Richards, as I have the serpentine belt.  I can make out Model #48 but the last two numbers are not that clear.  Checking a few suppliers the model number 4822 is configured like mine at a cost of $225 give or take.


RE: Sanden Compressor Model Number - Richard - 08-23-2020

Yep 4822 is the label on the serpentine pulley variety.