Posts: 5,751
Threads: 493
Joined: Jul 2012
hi all,
do you guys have any suggestions on what to use for exhaust gas venting using hose for the coach and my truck?
i have looked online and you can find ones that are like 100 bucks a foot, but that is not what i am looking for. i am talking about running it about 35 to 40 feet.
tom
2002 45'8" Newell Coach 608 Series 60 DDEC4/Allison World 6 Speed HD4000MH
Posts: 835
Threads: 58
Joined: Aug 2012
Foil wired commercial dryer vent. I used this for car exhaust back in the 90s and it worked great.
Larry, Hedy & Benny Brachfeld
2003 Coach # 646
2 Slide, DD
MINI Cooper Clubman S
MINI Clubman , John Cooper Works Rally Edition # 3 of 70
Monster 1000 Watt, Electric Skateboard
Yamaha Golf Cart painted Kawasaki Green
A Coach driveway with a shade structure and swimming pool
A Pueblo Home on the Border
Posts: 5,751
Threads: 493
Joined: Jul 2012
you think it will not melt?
tom
2002 45'8" Newell Coach 608 Series 60 DDEC4/Allison World 6 Speed HD4000MH
Posts: 4,188
Threads: 635
Joined: Jul 2012
I doubt it would melt but technically, it is only rated for 430 degrees F per UL 2158A “Clothes Dryer Transition Duct” Standard. For a coach without a Diesel Particle Filter, at idle, that should be close to the exhaust gas temperature but but within the limits. A diesel running a DPF has significantly hotter gas, frequently exceeding 750 degrees F at the exhaust.
http://www.fs.fed.us/eng/pubs/pdf/08511816.pdf
Michael Day
1992 Newell 43.5' #281
NewellOwner.com
Posts: 5,751
Threads: 493
Joined: Jul 2012
and it is cheap enough. not like i am going to run it for hours.
i may try it.
thanks michael
tom
2002 45'8" Newell Coach 608 Series 60 DDEC4/Allison World 6 Speed HD4000MH
Posts: 1,695
Threads: 123
Joined: Aug 2012
Where are you planning to run the exhaust tubing? Can you use regular exhaust pipe except for the last 4 feet or so where you connect to the vehicle?
1993 Newell (316) 45' 8V92,towing an Imperial open trailer or RnR custom built enclosed trailer. FMCA#232958 '67 Airstream Overlander 27' '67GTO,'76TransAm,'52Chevy panel, 2000 Corvette "Lingenfelter"modified, '23 Grand Cherokee.
Posts: 5,751
Threads: 493
Joined: Jul 2012
i dont want that much steel pipe just laying around.
if i do it, i have two locations in mind. at the back of the shop by the rear man door i will have a 50a receptacle on the inside. for a second coach in the shop or the ability to use a welder ouside the rear door or....for a coach to be hooked up in the back. so i was thinking about putting a small cat or doggie door there for a power cord and this hose.
but it is about 40 foot from the exhaust of the coach.
or i could put one just right by the coach and only run about 10 feet.
not sure what i am going to do if anything
tom
2002 45'8" Newell Coach 608 Series 60 DDEC4/Allison World 6 Speed HD4000MH
Posts: 835
Threads: 58
Joined: Aug 2012
Never melted on me and I used that venting for 10 years in my small shop and had small sports cars running for long periods back in the old days when I used the foil/wire vent hose... You should consider how cheap and compact it is too. 100 feet stores up in a small box
Larry, Hedy & Benny Brachfeld
2003 Coach # 646
2 Slide, DD
MINI Cooper Clubman S
MINI Clubman , John Cooper Works Rally Edition # 3 of 70
Monster 1000 Watt, Electric Skateboard
Yamaha Golf Cart painted Kawasaki Green
A Coach driveway with a shade structure and swimming pool
A Pueblo Home on the Border
Posts: 5,751
Threads: 493
Joined: Jul 2012
yea, i like. only thing is the exhaust on the bus is 6" if i recall. that is only a 4" but i like the idea. cheap, easy to store,
tom
2002 45'8" Newell Coach 608 Series 60 DDEC4/Allison World 6 Speed HD4000MH
Posts: 2,695
Threads: 228
Joined: Jul 2012
Did you look at ducting.com
They seem to have a variety of different types.
Forest & Cindy Olivier
1987 log cabin
2011 Roadtrek C210P
PO 1999 Foretravel 36'
1998 Newell 45' #486
1993 Newell 39' #337