[[email protected]]

Hwh hydraulic slide lock pin, leaking on bedroom slide. MODEL # AP19920 S# 2349, does anyone have a part# for rebuild seal kit. 
Thank you,
James Price
Coach 647, 500 SD

[Richard]

Look at third picture in first post. https://newellgurus.com/showthread.php?tid=5752

[[email protected]]

Richard thanks for the post, just what i needed. Richard do you have a way to test for leaks without reataching?
Thanks again,
James Price
Coach 647, 2003, SSD

[Richard]

You can use a portable hyd pump. You may have to cobble some adaptor fittings. https://www.harborfreight.com/4-ton-port...H8QAvD_BwE

The pins on mine were not scored so I didn’t bother. Of course, I activated the room a few times before I put all the covers and valence back in place.

[Jack Houpe]

Or bedroom slide has them but they don't work, someone prior to our ownership has taken them out of the circuit and I have not investigated what they did but the slide goes in and out.

[rvguy]

I have all the orings that you can replace in the lock pin. Let me know and I can send you some. Rebuilt all of mine last year. Lattitide28 has a great write up on it as Richard explained. Pretty easy job. Make sure you buy the long snap ring pliers/ The hardest part of the job is getting the snap ring off inside the block ( specially if your eyes are not that good)