07-30-2024, 07:37 AM
I did reach out to the a/c supplier but they do not have the plugs since they come preassembled to the compressor. Regarding the connector blades, those are available on amazon but since this is a high amp component, I didn't want to risk going that route. 100 of them would be $25 but they did reach out to me and have no stock available. (China, Alibaba)
Using the part number, I did find the image of the part however it is only out of China with no stateside stock. It's ok. I will have to manually unplug the compressor to reset it when it gets a voltage spike. Happens every month or two. Most of the time when I discharge the battery bank heavily when running three a/c units and when plugged into shore power. Solar panels kick in to help during the day. We are not sure why the compressor is sensitive to a volt over since it is rated for 60v. (Typically battery bank may charge at 54v which is above my settings of 53.2v)
Using the part number, I did find the image of the part however it is only out of China with no stateside stock. It's ok. I will have to manually unplug the compressor to reset it when it gets a voltage spike. Happens every month or two. Most of the time when I discharge the battery bank heavily when running three a/c units and when plugged into shore power. Solar panels kick in to help during the day. We are not sure why the compressor is sensitive to a volt over since it is rated for 60v. (Typically battery bank may charge at 54v which is above my settings of 53.2v)
--Simon
1993 8v92TA #312