Mini plug source - Printable Version
+- Newell Gurus (https://newellgurus.com)
+-- Forum: Technical Discussions (https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Electrical (https://newellgurus.com/forumdisplay.php?fid=30)
+--- Thread: Mini plug source (/showthread.php?tid=8065)
+- Newell Gurus (https://newellgurus.com)
+-- Forum: Technical Discussions (https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Electrical (https://newellgurus.com/forumdisplay.php?fid=30)
+--- Thread: Mini plug source (/showthread.php?tid=8065)
Mini plug source - BusNit - 07-11-2024
Does anyone know what this plug is and where I can get one? The supplier of the A/C unit gets these preassembled onto the compressors. I want to add in a cut off switch without cutting off the stock connectors.
RE: Mini plug source - [email protected] - 07-12-2024
(07-11-2024, 05:31 PM)BusNit Wrote: Does anyone know what this plug is and where I can get one? The supplier of the A/C unit gets these preassembled onto the compressors. I want to add in a cut off switch without cutting off the stock connectors.
Look up weatherpack connectors, I think that style has a name for it but it escapes me at the moment.
RE: Mini plug source - arcticdude - 07-12-2024
It looks like a Delphi type connector. There are a variety of them.
RE: Mini plug source - [email protected] - 07-12-2024
(07-12-2024, 03:12 PM)arcticdude Wrote: It looks like a Delphi type connector. There are a variety of them.
That's the name I was looking for!
RE: Mini plug source - BusNit - 07-12-2024
Thanks guys! I am doing a search by image but nothing is matching up. These came on a Chinese sourced a/c compressor. Supplier of a/c kit gets them preassembled to units so he can't help me.
RE: Mini plug source - Richard - 07-12-2024
Let’s see if we can narrow down the search.
First, this is for the DC system you installed?
If so, we can expect the current to be pretty high.
What gauge wires are those?
Can you take the connector apart so we can see the ends?
There are a few companies that make high amp connectors. More pics and ANY numbers you have will help.
Who made the unit?
RE: Mini plug source - BusNit - 07-12-2024
Thanks Richard.
Unit is from Undermountac.com
48v DC system. I will get some pics when I go out there in a little bit. it's 113 in the shade now.
Wires appear to be #10 but could be #8 with a very thin insulation. Thinking they are 10. I was surprised the seller didn't know but I guess that's ok. He just assembles these kits. So far it's been working great for the last three months running non stop and under severe conditions. My victron will send a slight voltage spike which shuts down the compressor. System will run but not cool. This has happened three or four times. No fault of the supplier. What I want to do is install an inline remote controlled battery switch where I can reset the power with a button from the driver seat next to the thermostat. In doing this, I did not want to cut the stock connectors but instead use a plug and play method. Supplier suggested I read off the flashing LED code under the compressor cover the next time this happens. He hasn't seen any issues before. I will say that Tom the owner of Undermount a/c has been super responsive and helpful. I still stand behind their company in terms of quality and technical support.
RE: Mini plug source - arcticdude - 07-12-2024
Delphi is now called Aptiv, though you can still search Delphi connector and find them.
Iirc, www.waytekwire.com has a good selection. Mouser Electronics should allow you to drill down through their catalog to find part numbers for specific sizes, terminals and etc.
RE: Mini plug source - bikestuff - 07-13-2024
I did a google image search and found this…it looks pretty close…
Alibaba. https://www.alibaba.com/product-detail/DJ7021-8-21-For-Amp-auto_62496058244.html
Of course I dont know if it will fit, but it looks pretty close. Hopes this helps.
Bill
RE: Mini plug source - Richard - 07-13-2024
Bill for the win ! I have to figure out why his google lens search worked and mine did not.