Fault showing on Magnum Inverter - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Technical Discussions (https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Electrical (https://newellgurus.com/forumdisplay.php?fid=30)
+--- Thread: Fault showing on Magnum Inverter (/showthread.php?tid=7944)

---

Fault showing on Magnum Inverter - 360 - 04-08-2024

Coach was parked at the house for a day and becuase it was only a day I didn't plug in.  After 24 hours or so I got a notice on my phone that power was out and I went out to the coach and inverter had shut off and the fault light was on.  I fired up generator as I was leaving in coach in an hour or so and I still had 59% left on my SOC.  First time this has happened to me and I'm tyring to figure out what I should be looking for as we're heading out on a trip the end of the month and boondock the whole time and I'm not a fan of hearing the generator all the time.

---

RE: Fault showing on Magnum Inverter - Richard - 04-08-2024

oops, the particular fault should have been on the display.

Your SOC can get “off” over a period of time. When you plug back in, use the control panel to “force” the charger to charge. That should top you off, and reset the SOC meter.

---

RE: Fault showing on Magnum Inverter - TJ Clark - 04-08-2024

My Outback inverter started doing this. I have another inverter charger coming Wednesday. Sadly is is not showing any codes. It has been out of production for several years. So I figure it's time to replace it.

---

RE: Fault showing on Magnum Inverter - Richard - 04-09-2024

Brad,

If you will scroll a bit in this link, there is a screen shot showing how to retrieve the fault codes.

https://community.goodsam.com/t5/technical-issues/magnum-ms2812-fault-code-messages/td-p/2931335

---