Previous owner had capped a larger red air line that I could hear leaking at bottom front driver side right next to the 6-pack. I could see that it apparently had been hooked up to what appeared to be an air horn. When I hooked it back on the horn and tried to air up Coach, it started sounding like a freight train’s horn coming down the tracks. I couldn’t turn it off and the supply air is now staying at 0 psi. ? has anyone found to be in the same predicament? Should I just cap it and be done with it? Appreciate any feedback. Thanks
You have taken the air supply line that is usually attached to the six pack and hooked it up to the air horn. All the air pressure is going through the horn. Take the red hose off the horn and cap it until you cna find where the air hose is supposed to go. I will look under mine in the morning to see what makes sense
Richard and Rhonda Entrekin
99 Newell, 512
Maverick Hybrid Toad
Inverness, FL (when we're home )
There is a manifold on mine above the 6-pack that tee's off to provide air source to the horn. The horn has a 12v solenoid that activates it when you press the steering horn button. On the manifold of mine there is a feed that brings air to the 6-pack.
Ok. I’m an amateur sorry but I wonder how the supply was getting air if that line was capped before? There’s a pretty substantial bundle of airlines and it’s difficult to see above the 6-pack but I’ll try taking a picture with my phone to see if I can find another fitting where it could go. Thank again for your help gentlemen!
So I tried sending a video but I guess we are limited on space. I can see a newer blue line that is connected to what I think Simon referred to as horn solenoid and then it goes to air valve. I can’t see where the red line would go unless maybe the blue line is installed wrong.
Sorry, not the best pictures but best I could do. When I capped the red line (with screw like I found it) the coach aired up. All I can figure is that the previous owner’s mechanic installed the blue hose and capped the red supply line for some reason. I know this isn’t the right set up and if someone has a similar set up please let me know . Thanks again