You are not logged in or registered. Please login or register to use the full functionality of this board...


Bottom of Garage Door Seal
#1

Hi all,

Yea, not a newell thing but at least part of the newell house.   

my big garage doors let in a little water when it pours rain in a few spots.  

i tortured myself with all kinds of exotic solutions.....expensive/thicker seals, putting something on the floor, etc.  

but....this is what i did for 4 bucks a door.  it is supposed to rain alot early next week, so i will see if it works.  

i used 5/8" round foam backer rod that i got at home depot in 25' lengths for 4 bucks.  i used a wire to push through the seal on the bottom of the garage door, taped the foam rod to it and pulled it through.  there was 5 feet on each side left so i just pushed it back in and doubled it there.  

seems like that should create a better seal on the bottom of the door.  

well at least it was a cheap try if not.

tom


Attached Files Thumbnail(s)
   

2002 45'8" Newell Coach 608  Series 60 DDEC4/Allison World 6 Speed HD4000MH

Reply
#2

Am I correct that door cuts weren't put in the concrete? If so, anything besides putting those in after the fact will only slow down water intrusion. A diamond blade and diamond grinding wheel and some elbow grease will get it right.

06 M450LXi 3 slide
Reply
#3

This is the exact same thing I did to fix my Miata's convertible top gaskets (hollow) - filled in with this foam... good idea, let us know if it works. I will have a garage door again soon ...lol

Karen & Adrian Abshire 
1998 2 slide 45' Newell Coach 498 
Prior: 1985 Foretravel ORED 35, 1988 38' Foretravel U280, 2000 Foretravel 42' U320, 1990 Bluebird Wanderlodge WB40
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)