Posts: 112
Threads: 28
Joined: Jul 2022
Need a little help. I rebuilt the locking pins on the living room slide last year and it was pretty easy to get the front valance off.
now time to do the bedroom locking pins. Cant figure out how to get that front valance off, there are no bolts or screws like the front one had. Also the center roof piece slides with the slide in the roof. ( where the fan is ) Anybody/somebody has to have done this before. Any help on how to get that front valance off the bedroom slide would be greatly appreciated.
Adam & Dana Mize
coach # 480
1998 45' 2 slides
Detroit Diesel series 60 ddec
Posts: 1,266
Threads: 68
Joined: Sep 2022
On our coach you must pull the slide in about a foot then it just lifts straight up and off.
1999 45' #504 "Magnolia"
Gravette, Arkansas
1996 40 XL Prevost Marathon
Posts: 112
Threads: 28
Joined: Jul 2022
(07-27-2024, 04:27 AM)Jack Houpe Wrote: On our coach you must pull the slide in about a foot then it just lifts straight up and off.
I will give it a try but dont think mine is like that
Adam & Dana Mize
coach # 480
1998 45' 2 slides
Detroit Diesel series 60 ddec
Posts: 571
Threads: 29
Joined: Jul 2012
That’s how it worked on #530. A person on each end if possible.
Russ White
2016 Winnebago Vista LX 30T
#530 ( Sold )
1999 45' Double Slide - Factory upgrade 2004
Posts: 1,531
Threads: 155
Joined: Jul 2012
When you say “front valance” are you talking about the thing that holds the fan? Or the leather trim piece that is parallel to the wall?
Bill Johnson
Birmingham, Alabama
Posts: 5,409
Threads: 255
Joined: Jul 2012
You will find a bracket that ties the fan with the valence. Remove that bracket. Valence lifts straight up but room must be in about a foor as jack said
Richard and Rhonda Entrekin
99 Newell, 512
Maverick Hybrid Toad
Inverness, FL (when we're home
)
Posts: 112
Threads: 28
Joined: Jul 2022
TY will give it a try in the morning.
Adam & Dana Mize
coach # 480
1998 45' 2 slides
Detroit Diesel series 60 ddec
(This post was last modified: 07-28-2024, 06:32 AM by
rvguy.)
Posts: 112
Threads: 28
Joined: Jul 2022
(07-27-2024, 12:24 PM)bikestuff Wrote: When you say “front valance” are you talking about the thing that holds the fan? Or the leather trim piece that is parallel to the wall?
The leather trim piece parell to the wall. Cant figure out how to get that slide thing with the fan loose. I think I have to drop the fan to access the screw to release the bracket
(07-27-2024, 03:52 PM)Richard Wrote: You will find a bracket that ties the fan with the valence. Remove that bracket. Valence lifts straight up but room must be in about a foor as jack said
Richard , Do I have to take the fan down to access the screws that hold that bracket ? there is noway to be able to reach it from the top of the slide
Adam & Dana Mize
coach # 480
1998 45' 2 slides
Detroit Diesel series 60 ddec
(This post was last modified: 07-29-2024, 07:13 AM by
rvguy.)
Posts: 112
Threads: 28
Joined: Jul 2022
Thank you everyone for the help. valance lifted straight up with no bolts attached and the slide thing on the roof the bracket just sits in the wood piece of the valance. Slide pin on both sides have been rebuilt and no more red fluid leaking from the roof.
Adam & Dana Mize
coach # 480
1998 45' 2 slides
Detroit Diesel series 60 ddec
Posts: 1,266
Threads: 68
Joined: Sep 2022
Good news Adam!
1999 45' #504 "Magnolia"
Gravette, Arkansas
1996 40 XL Prevost Marathon
