Posts: 60
Threads: 5
Joined: Jun 2023
Has anyone ever replaced just the airbag bellows? I’m trying to figure out what’s the best way to replace airbags for my 1996. W01-358-9447 are no longer available.
Ole
1996 Newell 45’
Posts: 272
Threads: 41
Joined: Jun 2021
What are "airbag bellows"?
1998 Coach 484
1997 Suzuki Sidekick toad.
Cheers.
Posts: 60
Threads: 5
Joined: Jun 2023
It’s the rubber component of the airbag. I think 1T15-L2 is the bellow number for my airbags .
Ole
1996 Newell 45’
Posts: 5,412
Threads: 255
Joined: Jul 2012
Ole, on these airbags you replace the entire assembly.
Richard and Rhonda Entrekin
99 Newell, 512
Maverick Hybrid Toad
Inverness, FL (when we're home
)
Posts: 60
Threads: 5
Joined: Jun 2023
Ok thanks
Ole
1996 Newell 45’
Posts: 320
Threads: 4
Joined: Jun 2013
Ole,
Here you go:
https://www.stengelbros.net/352-9447-W01...16310.html
There are other options out there, but in my quick search this was the least expensive.
On edit- I see now Stengel is saying that bag isn’t available. But- the crossing Goodyear is:
https://www.stengelbros.net/1R11-066-Goo..._5630.html
06 M450LXi 3 slide
(This post was last modified: 05-01-2024, 06:27 PM by
arcticdude.)
Posts: 1,695
Threads: 123
Joined: Aug 2012
If Stenglbro. doesn’t have bags, See my thread entitled “air bags for 316” I think you may get your questions answered !
1993 Newell (316) 45' 8V92,towing an Imperial open trailer or RnR custom built enclosed trailer. FMCA#232958 '67 Airstream Overlander 27' '67GTO,'76TransAm,'52Chevy panel, 2000 Corvette "Lingenfelter"modified, '23 Grand Cherokee.
(This post was last modified: 05-01-2024, 08:52 PM by
HoosierDaddy.)
Posts: 5,412
Threads: 255
Joined: Jul 2012
Ole,
Drive air bags Goodyear 1r11-066
Tag air bags Goodyear 1r11-066
Some have used Goodyear 1r12-324 for the drives. There are two things to be aware of if you go that route. One, the air bag will be plumbed to eliminate the ping tank with the 1/4 line going directly to the air bag. Second, if you go with this bag, it has a slightly large diameter bellows which means the tag bag also HAS to be replaced with a 1r12 bag to keep the weight distribution between drive and tag the same. If yo install the larger diameter bags on the drive and keep the tag, then the drive will carry more weight and the tag less since all three bags on a side have the same pressure supply.
Richard and Rhonda Entrekin
99 Newell, 512
Maverick Hybrid Toad
Inverness, FL (when we're home
)
Posts: 60
Threads: 5
Joined: Jun 2023
Thanks Everyone. I've read many threads regarding this topic and it seems there's a couple of different options but they all involve buying a different bag and making adjustments. I was just trying to see if a specific bag that they are selling to me would work for my #397- it's for flyer govt busses/ firestone W01-W35-9127. It's a bit higher when extended (15") and bottom plate is not single and the spacing between the top plate air intake and bolt is off by 1/2".
Ole
1996 Newell 45’
Posts: 320
Threads: 4
Joined: Jun 2013
Ole- as a correct bag is available I would not try to fit something else unless you’re in an emergency “have to drive it now” position.
Get the right bags and be done with it.
06 M450LXi 3 slide