Posts: 52
Threads: 8
Joined: Sep 2023
Richard, Right now I have the alternator cable mounted on the chassis post of the isolator. So you say it can be left this way and will only charge the house batteries if I merge them.you mentioned monitoring the volt and ameter.What would I be looking for on those or watching for?
Willie and Rachel Moore
Neenah,Wisconsin
1997 45’ #465 DD60
2020 Coachmen 210QB
2010 26’ Conquest tt
1995
38’ Wellcraft Scarab Thunder twin 500
1988 Donzi 29Z t 454 mag
Posts: 52
Threads: 8
Joined: Sep 2023
Ken, what gauge wire is the jumper on your isolator?
Willie and Rachel Moore
Neenah,Wisconsin
1997 45’ #465 DD60
2020 Coachmen 210QB
2010 26’ Conquest tt
1995
38’ Wellcraft Scarab Thunder twin 500
1988 Donzi 29Z t 454 mag
Posts: 5,412
Threads: 255
Joined: Jul 2012
(03-13-2024, 10:12 AM)WillieG Wrote: Richard, Right now I have the alternator cable mounted on the chassis post of the isolator. So you say it can be left this way and will only charge the house batteries if I merge them.you mentioned monitoring the volt and ameter.What would I be looking for on those or watching for?
That is good. I would look for any sustained charging over a 100 amps. In my experience with 390, the belts would give up the ghost when the alternator pulled over a 100 for more than half an hour or so.
And yes, you will only charge the house batteries when you activate the merge switch.
Richard and Rhonda Entrekin
99 Newell, 512
Maverick Hybrid Toad
Inverness, FL (when we're home
)
Posts: 22
Threads: 1
Joined: Dec 2019
Willie. We used 12 gauge wire for the jumper.
Ken and Pam Cameron
Newell #566, 2000 Newell 45 with 3 slides
Tow 2017 Ford Cmax Energi Hybrid
Posts: 52
Threads: 8
Joined: Sep 2023
Thanks
Willie and Rachel Moore
Neenah,Wisconsin
1997 45’ #465 DD60
2020 Coachmen 210QB
2010 26’ Conquest tt
1995
38’ Wellcraft Scarab Thunder twin 500
1988 Donzi 29Z t 454 mag
