Posts: 1,266
I need to order the things that go in the hole for the slide plungers from Newell but not sure these are the correct ones - see pictures please
Attached Files
Thumbnail(s)
Posts: 5,751
they look like the ones i have. i have some in the shop i will go check later
Posts: 1,266
Ordered them from Newell - hopefully I won’t lose these!
Posts: 1,268
I have a little experience with these we have many of them they are used on not only the leading edge of the slide but the trailing end of the slide, in our case they are drilled, counter sank and screwed to the coach, this is not what came from the factory but if your in a bind we will sell you the new ones we have, I bought the material they are made of and can cut out my own with my mill.
Attached Files
Thumbnail(s)
Posts: 1,266
I need to know if I should cut these grommets off - they are sticking up about 1/2” above the slide room top - please see pics
Attached Files
Thumbnail(s)
Posts: 1,266
Tom helped me figured it out - these just slip in and the slide pins push them down. It’s nice and quiet inside now :-)
(This post was last modified: 05-05-2023, 02:21 PM by
pairodice .)
Posts: 1,266
BTW, these ended up costing me nearly $250 for overnight shipping from Newell but the DIFFERENCE IN NOISE is dramatic! No more clattering slide! Now I can hear all the other thing that are loose from driving I-20 and I-10!!!
