Posts: 5,751
Threads: 493
Joined: Jul 2012
the rubber seal over the doorbell button has ripped after all these years.
i looked on the forum and couldnt find anyone who has a part number for the button.
anyone know?
thanks
tom
2002 45'8" Newell Coach 608 Series 60 DDEC4/Allison World 6 Speed HD4000MH
Posts: 715
Threads: 49
Joined: Apr 2014
You may have to replace the doorbell button with something like this
Amazon button.
I did an internet search for "weatherproof push button switch" and then switched to the 'image' view.
Jon & Chris Everton
1986 40' Dog House #86
450 hp ISM 5 spd ZF Ecomat 2
2004 Range Rover L322 Toad
Posts: 38
Threads: 5
Joined: Dec 2021
I am thinking of installing a video door bell, if it works (not sure of the voltages yet) i will give you mine as i wont need it anymore
2005 Mid Entry 600hp Newell
Piper Jetprop 560 HP
Aviat Husky Taildragger
2019 Porsche 911 Turbo S Exclusive
Delorean Turbo Special
Posts: 237
Threads: 24
Joined: Mar 2022
Is the doorbell button hole 12mm? This one is non-rust stainless, and waterproof.
https://www.amazon.com/dp/B09BKW2QDR/
Joe Zhao @ Greenville TX 75402
2004 Newell Coach 701, 45-8, 4 Slides, Front Entry
Detroit Diesel 60 w/DDEC, Allison 6-Speed AT, ZF Suspension w/Steerable Tag, ZF Auto Traction Control
(This post was last modified: 11-11-2022, 08:11 PM by
kaptain.)
Posts: 237
Threads: 24
Joined: Mar 2022
Oh, just realized you need a non-latching, momentary switch. how about this one
https://www.amazon.com/dp/B08R9P9DFC/
Joe Zhao @ Greenville TX 75402
2004 Newell Coach 701, 45-8, 4 Slides, Front Entry
Detroit Diesel 60 w/DDEC, Allison 6-Speed AT, ZF Suspension w/Steerable Tag, ZF Auto Traction Control
