[B and C]

Hi, I am working on the bay compartments and would like to know the manufacturer of the pull-type latches.  i have one missing the lock therefore the locking actuator is non-functional.  Also need a couple of toggles.

Thanks,

[Richard]

That is your garden variety ford door lock actuator. https://www.amazon.com/Passenger-Actuato...108&sr=8-9


Oops, I think I misunderstood what you are asking for. Anyway, maybe you will need some of the actuators.

[encantotom]

do you mean the metal door latches that are on the outside of the bay door? and what do you mean by toggles?

tom

[B and C]

Sorry, not a very good explanation.  Yes, the metal latch on the outside of the bay door.  The lock is missing on one door therefore I don't have the toggle on the back of the lock to connect to the actuator arm.  

Also, the 12v lights in the bays, any recommendations on where to find a replacement would be appreciated.  I have a couple where the switch has been broken off.  They use miniature halogen bulbs and have a plastic grill over the lens.

It's a steep learning process on these coaches.
Thanks.

[encantotom]

I used these.  Very bright and led

Tom

[bestgenman]

I have a variety of paddle latches in inventory with locks.  If you could post a picture, I will look to see if there is a match.  Or, perhaps I could fabricate the part you need.

[B and C]

Thank you Tom, I will look into the lights you suggested.  Brighter would better than the original lights.
Gordon, I send a picture of latch and the lock as well as the toggle i need in a couple of days.
Thanks

[bestgenman]

Chris, I haven’t received a picture from you but I did take a picture of a couple of many different styles that are left over from production. 
   

The lock sets may work but the operators of the back side may not match.  Take a picture of one of the other doors with the operator of the back side and I might be able to fab one for you.  These locks will have a different key than yours.

Many have removable operators. They are either firmly fixed or attached with a machine screw.

[B and C]

Gordon,

Below are pictures of the latch, front and back.  What i call the toggle is the piece where the actuator arm attaches.


Thanks,
Chris


       

[bestgenman]

Chris, either one of the locks would work however, one with a machine screw to hold the actuator since one would have to be duplicated.  I believe there are some locks in my stash with machine screws and I could make the operator if you would like.  Email me.