[arcticdude]

Rick,

I think that's the same stuff. The package has been changed since I bought several years ago. I'm pretty sure I still have what I got at home and will check when I get home later today. It used to show the plastics it would stick to on the back of the package.

[MrE]

Product Overview
For invisible repairs to difficult-to-bond hard and soft plastics like polyethylene, polypropylene and polytetrafluoroethylene, Loctite Super Glue Plastics Bonding System gets the job done. Loctite Plastics Bonding System is a two-part cyanoacrylate adhesive that sets in seconds, dries transparent, and successfully bonds plastics with no mixing or clamping required. Resistant to water, most chemicals, and even freezing temperatures, Loctite Super Glue Plastics Bonding System delivers truly tremendous strength in just a single drop. Each order includes one 4ml activator for priming and one 2g tube of super glue.
Two-part adhesive bonding system formula includes glue and activator to prime surfaces for a superior bond
Easily fuses hard-to-bond plastics such as polyethylene (PE), polypropylene (PP), and Polytetrafluoroethylene (PTFE)
Highly-resistant, strong cyanoacrylate adhesive with no required clamping or mixing
Bonding system sets in seconds and instantly dries transparent for invisible repairs
Weatherproof formula resistant to water, most chemicals and common solvents, and freezing temperatures
Convenient double-syringe applicator dispenses equal amounts of each component every time
Handling strength achieved in 20 to 25 minutes
Versatile super glue that can be used in many different applications and will not shrink or crack when drilled

[Wanderman]

Sure sounds like it would work. I will let everyone know

Thanks again.

[Latitude 28]

At work years ago, we had a Loctite product that we used on a solid rubber seal about 3/8" tapering to 1/8" x 2". We square cut the seal and butt glued it with the Loctite adhesive. After the proper cure time two of us tried to pull it apart.......it did not separate at the glue joint, in fact it stretched as if it had never been glued. Having said all this I'd be real interested in your results.

[Wanderman]

I've always had good results with Loctite products. In fact, I use several varieties on fasteners on my helicopters and it's never let me down.

Fingers crossed!

[arcticdude]

Rick,

That is what I used on my fresh water tank fitting. The back is slightly different, but the front of the package is the same. I glued a drain fitting on my 120 gal tank. Worked great.