Posts: 348
Threads: 48
Joined: Aug 2012
I know there has been talk about this valve but cannot find any post.
Would like to know what size thread is the drain plug so I can order a Fumoto Valve.
Thanks
Brad
1988 40 ft 8v92 newell
Coach name Big Blue
25 ft Haulmark car hauler with Andersen Anti sway
2012 Toyota FJ Cruiser.
Posts: 2,695
Threads: 228
Joined: Jul 2012
I've used one since my first oil change. Really works great especially when taking an oil sample. If doing your own oil changes you can drain the oil directly into the jugs.
I'll dig around and see what size I bought.
OK, just checked and it is a T-202
Forest & Cindy Olivier
1987 log cabin
2011 Roadtrek C210P
PO 1999 Foretravel 36'
1998 Newell 45' #486
1993 Newell 39' #337
(This post was last modified: 12-14-2012, 08:16 AM by
folivier.)
Posts: 5,751
Threads: 493
Joined: Jul 2012
hi brad,
this is a simple question that led me to looking at them. i have one of them on my generator and it is very useful.
i did find that people were leaning towards the femco version for what they claim is better quality and lower profile so you might look at them as well.
i did not find any references as to what size it is.
others refer to this system as something that is very cool. either a permanently mounted version or this portable version. a diesel oil removal pump powered by 12v. it pumps directly into a can or container. the pump itself is 289 retail. OP-6 for another hundred bucks retail you get the portable version with hoses and such as you can see from the link below. i found the one listed below for 280 bucks online. it would do the trnny as well. anyone have any experience with these oil removal pumps?
tom
http://reversopumps.com/portable-oil-cha...nge-op-700
2002 45'8" Newell Coach 608 Series 60 DDEC4/Allison World 6 Speed HD4000MH
Posts: 5,751
Threads: 493
Joined: Jul 2012
it does appear that if you go to the femco site, that you can put in what engine you have and they tell you what plug you need. could be there is a similar one for the fumoto.
tom
2002 45'8" Newell Coach 608 Series 60 DDEC4/Allison World 6 Speed HD4000MH
Posts: 5,751
Threads: 493
Joined: Jul 2012
http://www.youtube.com/watch?v=6JRHLZ9eDoc
youtube video on the femco valve and how it works. i think i like this better than the fumoto i have on my genny.
tom
2002 45'8" Newell Coach 608 Series 60 DDEC4/Allison World 6 Speed HD4000MH
Posts: 2,695
Threads: 228
Joined: Jul 2012
Looks nice. Fumoto does make a version with a nipple to attach a hose onto but it does extend a bit longer so check clearance.
Anybody using the Femco?
Forest & Cindy Olivier
1987 log cabin
2011 Roadtrek C210P
PO 1999 Foretravel 36'
1998 Newell 45' #486
1993 Newell 39' #337
Posts: 1,695
Threads: 123
Joined: Aug 2012
I have the Femco on my Chevrolet diesel. Works as advertised....Makes a real mess if you lose the fitting that screws on to drain and you have to shove a screwdriver up in there to push the valce open! I think the Fumoto works with no other attachements needed.
1993 Newell (316) 45' 8V92,towing an Imperial open trailer or RnR custom built enclosed trailer. FMCA#232958 '67 Airstream Overlander 27' '67GTO,'76TransAm,'52Chevy panel, 2000 Corvette "Lingenfelter"modified, '23 Grand Cherokee.
Posts: 2,695
Threads: 228
Joined: Jul 2012
Yes the Fumoto has a lever that you push up (or down?) into a detent to open.
Forest & Cindy Olivier
1987 log cabin
2011 Roadtrek C210P
PO 1999 Foretravel 36'
1998 Newell 45' #486
1993 Newell 39' #337
Posts: 5,751
Threads: 493
Joined: Jul 2012
the fumoto that is on my genny is very easy to use and seals immediately. but it sticks out quite a ways.....
tom
2002 45'8" Newell Coach 608 Series 60 DDEC4/Allison World 6 Speed HD4000MH
Posts: 1,695
Threads: 123
Joined: Aug 2012
If I were in the market I'd get the Fumoto if there is adequate clearance.
1993 Newell (316) 45' 8V92,towing an Imperial open trailer or RnR custom built enclosed trailer. FMCA#232958 '67 Airstream Overlander 27' '67GTO,'76TransAm,'52Chevy panel, 2000 Corvette "Lingenfelter"modified, '23 Grand Cherokee.
