Posts: 2,695
Threads: 228
Joined: Jul 2012
If you've replaced your 50 amp plug, which brand plug are you using?
Mine is starting to show its age and I want to order one before I need it.
Forest & Cindy Olivier
1987 log cabin
2011 Roadtrek C210P
PO 1999 Foretravel 36'
1998 Newell 45' #486
1993 Newell 39' #337
Posts: 829
Threads: 75
Joined: Jul 2012
I've used this one. Like the handle. Walmart has them.
http://www.walmart.com/ip/35829100?wmlsp...41&veh=sem
Jimmy
Posts: 672
Threads: 45
Joined: Jul 2012
heck the one I am using I found in the spares! I like the CAMCO that Jimmy posted but make sure that you check the tension on the screws again after using for a few days as a precaution.
Steve & Patti, Bonnie and Tucker
1982 Newell 38' Classic, DD 6V92
cocktails for as many will fit in the site, dinner for as many can sit at the pick-nick table and sleeps 2 since I fixed the couch
Posts: 1,531
Threads: 155
Joined: Jul 2012
I ordered a Hubbell plug but have not had a chance to install it.
http://www.amazon.com/HUBBELL-HBL9452C-P...ll+50+plug
I think that this is an item that warrants more attention. When I looked at my coach, it was clear that the connectors had been loose and caused some heat build up.
Now the wires are trimmed and the connections re-tightened, but I will replace as soon as I get a chance.
If I had stayed at the rally, I know that I would have been able to find some supervision to ensure that I did it properly!
Bill Johnson
Birmingham, Alabama
