Posts: 64
Threads: 7
Joined: Jan 2021
Per your photos, I was able to locate the sensor on my coach just in case future replacement is needed. Limited access for sure and an inspection mirror was needed. I'm guessing you just had to reach and feel your way through the replacement?
Rob
2016 Newell #1536
Posts: 302
Threads: 30
Joined: Nov 2020
(05-26-2024, 05:16 AM)hypoxia Wrote: Photos of the NOx sensor.
You're an amazing resource, Jim...thank you for watchin' out...although sorry for the reason you know so much of these things!
Steve & Janice Vance
2015 Newell #1524
Glendora, CA
Posts: 493
Threads: 59
Joined: Jun 2022
Updated post #6 to include photos of the NOx Sensor Removal Tool
Jim
2014 Newell Coach 1482 Mid Entry 45'8" Valid Slides and Valid Levelling
Posts: 5,751
Threads: 493
Joined: Jul 2012
would a normal crowfoot work with it? something special with this tool?
tom
2002 45'8" Newell Coach 608 Series 60 DDEC4/Allison World 6 Speed HD4000MH
Posts: 493
Threads: 59
Joined: Jun 2022
(05-30-2024, 08:58 AM)encantotom Wrote: would a normal crowfoot work with it? something special with this tool?
tom
A 7/8" crows foot would work if you could fit it in. Would more than likely have to be ground down. The NOx tool can be had for less than $10 at Harbor Freight etc. I suppose a 7/8" flare nut wrench may also fit. Not much real estate available in there. The normal oxygen sensor socket is too short for this sensor, at least the ones I tried. I'm on the road, most of my specialty tools are not with me.
Jim
2014 Newell Coach 1482 Mid Entry 45'8" Valid Slides and Valid Levelling
Posts: 493
Threads: 59
Joined: Jun 2022
Most auto parts stores, AutoZone, O'Reilly's, Advance, etc. have loaner tools. That's where I got the NOx tool.
Jim
2014 Newell Coach 1482 Mid Entry 45'8" Valid Slides and Valid Levelling
