[qcj]

Steve, I have replaced front and tag oil in bearings reservoir. Got into a little bit of trouble, because on my front wheels it has "minimum oil level". It does not have full. So I filled it above the minimum oil level. Well I noticed that I had oil streaks on my wheels, so bought new plugs and that didn't help. Then my brakes started acting different, like the rotors maybe had high spots on them which when had to brake hard there would be a shimmy in the steering wheel. Finally figured out when the wheels got hot the oil level went above the fill hole and more than likely some oil got on the rotors. So today I brought the oil level back down to minimum. It would have saved me a lot of trouble if it had said minimum cold level. On my next trip I hope this solves the problem. My tag reservoir has a full mark and every MH I've owned has had a full mark. On this 99 my front only has minimum. I hope this might help others if their oil reservoir is the same as mine or maybe I just made a stupid mistake. Chappell