After having the exterior door handle break months ago, I locked the entry door deadbolt yesterday and the door locked but the key just kept on turning. Turns nicely in either direction several complete turns but doesn't unlock the door. Naturally, all the windows are locked. I think I can drill out the lock and use a screwdriver to rotate the bolt BUT I can't find a lock that matches. My coach uses a Schlage lock that is virtually flush with the exterior of the coach (there is a trim ring that sticks out about 1/16" and the lock face is flush with that). All of the new Schlage locks stick out well over an inch and would look like powdered poo on the coach.
Short of the easy fix of drilling it out then hoping that I can find some brand of lock that will fit into the existing opening and trim ring, I don't know of any solution other than paying someone to remove the windshield, let me crawl in and remove the lock from the inside with a screwdriver and reinstalling the windshield. I checked with Chuck at Newell and when they 'cleaned out' their low turnover parts several years ago, they got rid of the extras they had. They aren't even in their computer system any longer.
Any suggestions before I destroy something that may be irreplaceable? I night be able to find parts to fix the existing lock IF I could get it out without damaging it but I really am not keen on the windshield removal alternative.
Short of the easy fix of drilling it out then hoping that I can find some brand of lock that will fit into the existing opening and trim ring, I don't know of any solution other than paying someone to remove the windshield, let me crawl in and remove the lock from the inside with a screwdriver and reinstalling the windshield. I checked with Chuck at Newell and when they 'cleaned out' their low turnover parts several years ago, they got rid of the extras they had. They aren't even in their computer system any longer.
Any suggestions before I destroy something that may be irreplaceable? I night be able to find parts to fix the existing lock IF I could get it out without damaging it but I really am not keen on the windshield removal alternative.