08-09-2013, 12:07 PM
My coach has a City / Tank switch located in water bay and a second City / Tank switch in the galley. I put that switch in the City position to take water directly from the hose bib located in the water bay. (I forget how the switch is actually labeled, but I am sure that one part of label is "city").
The auto-fill overflowing is a second issue. There is a valve that controls that in the water bay, and in my case a little weep hole got plugged up in the valve keeping it from working. (There is another thread on the autofill valve issue). I would leave the autofill switch in the "OFF" position.
Once you turn the switch to city and connect the water to the bib (mine is in lower right of water bay), then you should be able to use the pressure coming from the city. (I have not tried this, but think I would be able to turn pump off at that point).
cheers,
bill
The auto-fill overflowing is a second issue. There is a valve that controls that in the water bay, and in my case a little weep hole got plugged up in the valve keeping it from working. (There is another thread on the autofill valve issue). I would leave the autofill switch in the "OFF" position.
Once you turn the switch to city and connect the water to the bib (mine is in lower right of water bay), then you should be able to use the pressure coming from the city. (I have not tried this, but think I would be able to turn pump off at that point).
cheers,
bill
Bill Johnson
Birmingham, Alabama