10-27-2024, 04:15 PM
It is not uncommon for bay floors to rust out.
I have replaced sections with 14G sheet metal. Be aware of underlying structure when cutting out with sawzall, grinder, or plasma.
I like POR 15 for the paint. Also check out a foam beak for using spray foam from the big box store to recoat the underside. https://foambeak.com/ A regular tip on the can will not spray upside down. I use a piece of 1/4 hose so I can hold the can upside down and the foam beak up against the horizontal surface.
I have replaced sections with 14G sheet metal. Be aware of underlying structure when cutting out with sawzall, grinder, or plasma.
I like POR 15 for the paint. Also check out a foam beak for using spray foam from the big box store to recoat the underside. https://foambeak.com/ A regular tip on the can will not spray upside down. I use a piece of 1/4 hose so I can hold the can upside down and the foam beak up against the horizontal surface.
Richard and Rhonda Entrekin
99 Newell, 512
Maverick Hybrid Toad
Inverness, FL (when we're home
)