[pairodice]

So I adjusted the front ride height valve about 1-1/2” down (to get 3” of drop) from the original location and the coach dropped all the way down until the tire was touching the side fender and scraping (on the test drive). I readjusted the HCV back up to original and down about 1/2” and after a joy(less) ride the coach WAS sitting correctly in all four corners with just an inch above the front tire while at the shop. After another ride the back driver side is way up pass rear:11” driver rear:14” pass front:9” driver front: 14” :-(
Any suggestions