08-13-2024, 11:57 AM
Update-so after priming the system and still a no go, I bought the adapter for the computer and the mechanic was able to connect and read the responses below. The diagnosis according to him is likely that the injectors aren’t getting any current. He suggests buying a new injector harness as that’s likely the culprit. I asked him to send me the pictures of the computer system for me to post them here. Maybe you all have had this happen before? He doesn’t think all 6 injectors are bad but still
Needs to access the engine.
If that’s the case, the access to the top of the engine will require dismantling the bedroom closet as I don’t see any access latches. I have the small closet doors in the back which I was planning on remodeling any way. If you think or this has happened to anyone here I would really appreciate your feedback or any suggestions as to what else it could be. Thanks
Additional data
Additional data for
Computer
Needs to access the engine.
If that’s the case, the access to the top of the engine will require dismantling the bedroom closet as I don’t see any access latches. I have the small closet doors in the back which I was planning on remodeling any way. If you think or this has happened to anyone here I would really appreciate your feedback or any suggestions as to what else it could be. Thanks
Additional data
Additional data for
Computer
Ole
1996 Newell 45’