07-24-2024, 02:02 PM
Locking pins are active and in the locked position now.
I spoke to Newell they said there were 2 adjustment bolts on side of slide rail i loosened and pushed slide at floor and checked outside measurement and only moved 1/8 to 3/16". I retightened adjustment bolts, extended slide room back side of was sliding out 2" before front side appeared to move. Therefore slide hit on front about 1 foot from top, i retracted slide it locked in place but now the top front is sunk in. This may be over my head, and may require Newell. I would be appreciate any all sugestions. Thanks
James Price
2003 647 SSD
I spoke to Newell they said there were 2 adjustment bolts on side of slide rail i loosened and pushed slide at floor and checked outside measurement and only moved 1/8 to 3/16". I retightened adjustment bolts, extended slide room back side of was sliding out 2" before front side appeared to move. Therefore slide hit on front about 1 foot from top, i retracted slide it locked in place but now the top front is sunk in. This may be over my head, and may require Newell. I would be appreciate any all sugestions. Thanks
James Price
2003 647 SSD
James Price
Coach # 647 2003
60 Series Detroit