[Ole]

Today I started working on trying to get it running. I filled the primary fuel filter and tried starting it. The first few times I primed the heck out of it with the black button each time and it wouldn’t start. Then I unscrewed the primary filter and noticed it was down to about 1/3 full so ai tried filling it up again, primed it and nothing. I did this about 8 times, filling the primary and trying to start it but nothing. I couldn’t get to
The secondary as my coach is sitting very low. I’ve read that ether is bad and last resort so I only tried using very little and it started for a few seconds (about 10) and then shut down. I checked the filter and it was at about 1/3 again. I will try to make a priming device as described by Richard next and see if I can figure it out but it’s as if fuel isn’t getting to the primary filter from the fuel tank?