06-01-2024, 09:16 PM
Richard,
Right you are!! The only access (non-destructive) is from below. Its approximately 18 inches from the bottom of the door up to the striker nuts. Tools I am making for the first try are 24" long 1/2" box/open end wrench and 24" long 1/4" drive 90 tooth ratchet.
Oh, one thing I forgot was that the striker bolts are close enough together that any box end wrench or socket need to be thin wall. No ratcheting box end wrench. Thank God for these challenges, otherwise I'd be bored to death hahahahaha.
Right you are!! The only access (non-destructive) is from below. Its approximately 18 inches from the bottom of the door up to the striker nuts. Tools I am making for the first try are 24" long 1/2" box/open end wrench and 24" long 1/4" drive 90 tooth ratchet.
Oh, one thing I forgot was that the striker bolts are close enough together that any box end wrench or socket need to be thin wall. No ratcheting box end wrench. Thank God for these challenges, otherwise I'd be bored to death hahahahaha.
Bob & Dottie
Newell 1261 & Jeep Grand Cherokee fulltimers
Past Teton Reliance 45' 5th wheel
Custom Volvo VNL780 tow vehicle
2014 Smart car