[Jesse]

The lose wire was the wire going to the "top" spade connector on the backside of the ignition lock. My guess it's the power wire letting the HWH system know that the RV ignition is on allowing slide operation- super simple. Did have the limit switch fail for the living room slide last night, resulting in the floor not raising after the slide was deployed since the HWH couldn't detect the slide was out. Removed the basement ceiling and pieces of the switch fell on my head. Looks like a previous owner -Les Korcala, I'm directing this at you, JK! (Doubt he will ever see this)- Zip tied and hot glued the switch back together about 10 years ago. I was able to reassemble the switch and reinstalled it for full functionality with a large amount off electrical tape. I am going to reorder the switch but due to it's extensive repairs through the years all visible markings are long gone anyone have the part number? Other wise I plan on calling newell on Monday.

Thanks!

Jesse and Sara White
2001 Newell Coach #582
Wasilla Alaska