03-13-2024, 06:34 AM
The jumper wire has worked. No problems so far.
I didn’t want to replace a perfectly good isolator unless I had to.
If you decide to replace the isolator look at the Victron FETs models.
They are more efficient than the diode based older ones & they have a separate limited energize input that connects to the B+ terminal of the alternator, thus no need for the jumper. Good luck.
I didn’t want to replace a perfectly good isolator unless I had to.
If you decide to replace the isolator look at the Victron FETs models.
They are more efficient than the diode based older ones & they have a separate limited energize input that connects to the B+ terminal of the alternator, thus no need for the jumper. Good luck.
Ken and Pam Cameron
Newell #566, 2000 Newell 45 with 3 slides
Tow 2017 Ford Cmax Energi Hybrid