[Latitude 28]

While doing some cleaning I came across my rear engine bay rear electrical panel had some water damage to the 1/2" Formica covered plywood panel at the bottom 6".  The damaged wood was loose and screws were pulling out with just some slight pressure.  I removed stuff from the bottom area to gain access for a cut all the way across the panel.  I was not going to replace the whole panel....too hard.  Screwed a guide into place and made a cut line with my multi tool to remove the damaged plywood.  I used 1/2" Marine Starboard for my repair...it is not affected by any water, works like wood and holds screws very well.....comes in several colors.