[Jack Houpe]

After several months here at Orange Beach AL we started our departure to Cedar Key FL for a couple weeks then home but we got delayed due to the front slide not retracting. This morning I brought in the rear slide first then started on the front and heard the locking pins disengage then the floor dropped as usual but the slide came in about 1/2" then stopped. I could hear the motor loading down but no movement the first thing I thought of was the pump was low on fluid so I checked it and it was low a bit and put a quart into the tank but no change. I then thought of air in the lines but it was loading the pump a great deal so I discussed with Richard some of the trouble shooting I did but really made no progress till he said to open the release on the solenoid valves for extend and retract one at a time which I did but no change but looking at the diagram noticed Room extend flip arm and room retract flip arm not knowing what a flip arm is I manually opened the bypass valve on room extend flip arm and the slide closed 6 inches without the pump on! So I turned on the coach let the seals deflate and hit the retract button and it came in with the solenoid bypassed, I checked every fuse in the system and all of them are good so my question is which switch controls the flip arm solenoid and what is a flip arm? If I had the energy I would be trouble shooting the system but that will come when we get settled into Cedar Key.