[CaptainGizmo]

    Yes, have SPARES!!!! They are from SOUTHCO, but here's the problem...

Amazon has them, but may NOT be the official SouthCo mold.  Ask me how I found out!

The FOOT has been changed to a more ROBUST version.  So, while I have a bunch of the "thinner" version which break when you look at them cross-eyed...I orded a bunch of the beefier molded feet which....of course....have a bit longer base and, hence, the screw slots won't match up.  So, I dremel the screw slot on the foot a bit so I don't have to re-drill the base to which the foot gets mounted onto.

Also, take note that the majority of those feet are backed with VHB tape.  This serves two purposes; one is distribute the holding power (to make the foot last longer) and, two, to act as a shim for height variances.  I have as many as 3 layers for the reefer latches.

I'll show you the OLD thin version, and the new BEEFIER version.

   

Southco Latch j-c3-77.pdf Size: 71.78 KB  Downloads: 24