[BusNit]

Almost everything underneath has been replaced with compression. The last remaining are on the diff lock solenoid and everything inside and under the dash. I am dealing with a short circuit on the bedroom heaters. Troubleshot the wiring issue to behind a cabinet where a bunch of ductwork is fastened basically one of the only areas I cannot physically reach without removing floor to ceiling cabinets. My plan is to abandon that circuit which also feeds the rear A/C and run a new line all around the rear using the space behind the cove moldings and rear wall cabinets. The short is on the load out to the heaters. Regardless, I would feel safer to abandon that line since I can't put eyes on it. So disappointed as this is still a massive amount of work that I really do not feel like doing. This all failed when we went to the rally so I can't blame anyone other than time.