[TJ Clark]

Again, I am not saying this is your issue without seeing it. The giveaway was the area where the glass curves looks “proud” of the coach. It should appear in line with the coach lines.

About 1/4” total. Oscillating tool is your friend. Make a plastic drape to keep fiberglass away from as much as possible in the coach. Any time spent protecting against the dust will take one tenth the time it will take to clean it up. Not a job for the faint of heart. The glass is totally removed and so is the gasket. You need the pro vacuum cups, a scaffold, and two strong buddies.

It’s a long term true fix. If your coach is like the one that I worked on, the glass WILL NOT stay in place for any length of time.

I understand you are not telling me this is the fix. 

THe top left corner or the left glass and the bottom right corner of the right glass sit proud. The guys installing the glass fought for hours but could never get bothe corners fully seated. 

I can tell you I would have expected the issue to be with the A pillars but after hearing your descriptions I can follow the logic of the top and bottom being the issue. 


Thanks.