09-10-2023, 05:42 PM
Ouch, that hurts.. that is quite unusual on a relatively low mileage engine, generally this happens to the truck guys that push their maintenance intervals and rebuilds off. I would suspect a broken rod that made its way out the side.
Never tried it on a S60 (doubt it would work due to electronics) but on the mechanical 2 strokes, we would bypass the injector and disconnect the rod and push it up out of the way. Clean the pan out really good and then you put something on the side of the block to keep the oil in and the engine will run minus the bad cylinder.
Never tried it on a S60 (doubt it would work due to electronics) but on the mechanical 2 strokes, we would bypass the injector and disconnect the rod and push it up out of the way. Clean the pan out really good and then you put something on the side of the block to keep the oil in and the engine will run minus the bad cylinder.
Jeff LoGiudice
Temple Terrace, Fl
1984 Bluebird Wanderlodge PT40
1998 Newell 2000 #490
1986 MCI/TMC 102A3 (sold)