07-06-2023, 05:32 AM
Sounds like the travel height valve needs adjusting. Hard place to get to. Located inboard of the drive axle tires. On a level surface, measure from the ground to the bottom of the 1" square tubing in front of the rear drive axle wheel well. It should be about 11"-11-1/2". If one side is too high or too low, that is the side that needs to be adjusted. There is a rod from the valve to the axle. There is a hose clamp that tightens around the P around the rod. Loosen the hose clamp and move it up or down to adjust the ride height. Use the search function for "ride height" and you will find lot's of information. All of the side to side adjustment is in the rear. The front uses a single valve located behind the front axle in the center of the coach.