[ccjohnson]

Have you considered a trip to Miami? I had a guy in Phoenix work on one of my units for 4-4 days ordering and replacing parts. I had given him the manual from Dometic before he started. The tell should have been his reluctance to even glance at it. Tom McCloud had told me to check capacitors. After replacing condenser motor, compressor and drier, he noticed that the capacitor was shot. Still ended up making a trip to Miami to get it fixed because nobody seemed to be concerned about the glod of silver solder I saw drop inside the copper tubing when he was replacing the drier. Newell replace the compressor and then the drier and the short piece of tubing that had the solder blockage. Nitrogen would go past it easily, but you could not blow through it or evidently get refrigerant to pass by it easily. After that, unithas been working great! You do have my sympathies. We had to spend about 3 weeks in Gila Bend in July / Aug before we could make it to Miami with 2 good AC's and 1 that had been serviced from partially functional to inoperative. Ambient temps were 118 plus almost every day.