[BusNit]

Thanks for the compliments guys!  I am glad this is done with. What a saga that took many winter weekends to deal with. On the right side, someone either backed into the coach or driver scrubbed a fuel station pylon as the lower steel tube was concaved. I had to add shims in the form of stainless steel washers behind the rivets to keep the trim piece nice and square. I am happy with the results on both sides. All sealed up. Water test will happen in a few days to give the Dicor a chance to set up properly. Silicone was previously used which failed. So as they say.... "This concludes the emergency broadcast test"...