12-19-2022, 03:34 PM
Great post! I'll add a few tips.
Deoxit is your friend. Use it to clean oxidation off of fuse blades, etc.
Also realize that a wire may test good but when a load is put on the circuit the voltage may drop. Same situation as Richard posted above for fuses. This could also be caused by a bad crimp terminal.
Use these ferrules on wire ends wherever there might be flex: https://www.amazon.com/Ferrule-Crimping-...110&sr=1-4
Deoxit is your friend. Use it to clean oxidation off of fuse blades, etc.
Also realize that a wire may test good but when a load is put on the circuit the voltage may drop. Same situation as Richard posted above for fuses. This could also be caused by a bad crimp terminal.
Use these ferrules on wire ends wherever there might be flex: https://www.amazon.com/Ferrule-Crimping-...110&sr=1-4
Forest & Cindy Olivier
1987 log cabin
2011 Roadtrek C210P
PO 1999 Foretravel 36'
1998 Newell 45' #486
1993 Newell 39' #337