[Jack Houpe]

The compressors blow out toward the door but I have 4 opening in the bay 2 on each side, if you noticed I raised the compressor over the top of the opening under it, that will be air intake, both sides are the same. Then there is another opening in front of the compressor and the vented door. After everything is installed and tested I will use that double sided aluminum sign board (that I used on the main salon ceiling) to seal off the area around the front discharge and force all the outgoing air through the bottom screened opening and the door. There will be some mixing of air under the coach I'm sure but hopefully not enough to matter, if it does I'll close off the vent in front of the compressor going under the coach.