11-07-2022, 05:07 PM
I'm still having an issue with the water pressure in the half bath microphor. The adjustable water pressure regulator worked fine when I first turn on the water. However, after some time passes the pressure regulator migrates from 20psi to the same as the Head Hunter pressure between 50 & 60psi. This causes the toilet sequencer valve to jam.
I changed the regulator thinking it was defective. Like before the toilet worked great when I first turn the water on, but then jams again after a few hours go by.
Is it common for water pressure regulators to only work when water is flowing, and then loose the pressure regulating property if left static?
I changed the regulator thinking it was defective. Like before the toilet worked great when I first turn the water on, but then jams again after a few hours go by.
Is it common for water pressure regulators to only work when water is flowing, and then loose the pressure regulating property if left static?
David
2004 Newell #695
Series 60
Quad slide front entry