04-18-2013, 05:34 PM
One problem that I ran into and am still looking at involves the "flasher". The LED turn signals that many of us are using includes an internal circuit that is actually doing the "flashing". Before with the incandescent bulbs, the flasher relay in the dash terminal board did the "flashing". It does not work anymore because the LED units do not pull as much current.
There are two solutions: 1) install a resistor to draw more current and get the coach flasher to start working....or 2) Install an LED specific flasher that will work with LED turn signals. I am in the process of trying #2. Will let you know what I come up with.
I am not sure that is your problem...but I suspect that it might be part of the issue.
Cheers,
bill
There are two solutions: 1) install a resistor to draw more current and get the coach flasher to start working....or 2) Install an LED specific flasher that will work with LED turn signals. I am in the process of trying #2. Will let you know what I come up with.
I am not sure that is your problem...but I suspect that it might be part of the issue.
Cheers,
bill
Bill Johnson
Birmingham, Alabama