04-04-2022, 07:30 AM
I dont remember what the source of the draw was but what Richard said was correct. If you are running on battery, use the 12V air pump* and the 12V water pump. Be mindful of the high current draws like the fridge, and heaters.
To sort out the draws….get a DC clamp on ammeter and go to the fuse boards and start measuring each circuit.
* 653 had a weird thing where the front two seals would not be inflated by the 12V air pump. This was probably corrected in a later vintage.
To sort out the draws….get a DC clamp on ammeter and go to the fuse boards and start measuring each circuit.
* 653 had a weird thing where the front two seals would not be inflated by the 12V air pump. This was probably corrected in a later vintage.
Bill Johnson
Birmingham, Alabama