12-26-2021, 02:27 PM
I just received a new Dual element 220V flex cooktop and have removed the Gaggenau.
BEFORE I apply power to this thing I wanted to check the wiring.
The Gaggenau was Wired BLACK to BLACK, RED to RED, GROUND to BARE with WHITE Capped off in the box.
Attached is a photo of the wiring they suggest and a photo of how I have it wired.
It appears the Newell side:
RED wire gets wired to the WHITE wire on the cooktop
BLACK wire gets wired to the BLACK wire on the cooktop
Bare/Ground get wired to the GREEN wire
HOWEVER, The diagram in the manual shows the WHITE wire from newell being wired to the WHITE/Neutral!
Before I apply power and cook my cooktop... What's correct for the application?
Thanks!
BEFORE I apply power to this thing I wanted to check the wiring.
The Gaggenau was Wired BLACK to BLACK, RED to RED, GROUND to BARE with WHITE Capped off in the box.
Attached is a photo of the wiring they suggest and a photo of how I have it wired.
It appears the Newell side:
RED wire gets wired to the WHITE wire on the cooktop
BLACK wire gets wired to the BLACK wire on the cooktop
Bare/Ground get wired to the GREEN wire
HOWEVER, The diagram in the manual shows the WHITE wire from newell being wired to the WHITE/Neutral!
Before I apply power and cook my cooktop... What's correct for the application?
Thanks!
Be seeing you,
Rick Miller
#423
1996, 45'+, Non-slide, Series 60, ABS, 1.5 Bath, Reverse Floorplan