11-01-2021, 06:44 AM
On my '93 I took a sheet of black ABS plastic, cut it to size and used a heat gun to bend it to shape. Took a while to get the bend just right. I left the textured side out since the smooth surface shows scratches easily.
I left the old plastic in place and glued the new one over it. I don't remember what thickness but 1/16" or 1/8" is thick enough if you glue it over the old plastic. Not a difficult job.
I left the old plastic in place and glued the new one over it. I don't remember what thickness but 1/16" or 1/8" is thick enough if you glue it over the old plastic. Not a difficult job.
Forest & Cindy Olivier
1987 log cabin
2011 Roadtrek C210P
PO 1999 Foretravel 36'
1998 Newell 45' #486
1993 Newell 39' #337