09-22-2021, 02:50 PM
You can convert the bumper you have… if the six original mounting brackets are still on the coach, that’s twelve bolts (you probably only have four bolts now. Two for each end of the bumper)
Just drill holes in the bumper for the center section using the mounts as your guide, (that’s eight bolts) insert fender bolts with nuts to secure all four mounts four for the center section, and two for each inner bolt for each outer section of the bumper. then mark the bumper for cutting in two places between the bolts on the left and right of the center section mounts.
Just drill holes in the bumper for the center section using the mounts as your guide, (that’s eight bolts) insert fender bolts with nuts to secure all four mounts four for the center section, and two for each inner bolt for each outer section of the bumper. then mark the bumper for cutting in two places between the bolts on the left and right of the center section mounts.
Mike and Beth Magee ⚓
80 Newell Classic 37’ Cat 3208T
05 Ascender 4x4 toad
(Lol no pun intended)