04-03-2013, 11:11 AM
Another check to see if cap is tight.
Watch the overflow tank level when hot and compare to when cold, there should be a difference in level (fuller when hot). If you are not seeing this level change, you have a leak in the overflow plumbing.
Another thing I have found: Running on the Headhunter pump and filling the tank when needed keeps the pump active and the water in the tank fresh. Caution on letting the tank level get low enough to introduce air into the pump can cause a headache getting the air out!
Steve Bare's drawing is very helpful in locating the correct pipes.
Gordon Jones
Watch the overflow tank level when hot and compare to when cold, there should be a difference in level (fuller when hot). If you are not seeing this level change, you have a leak in the overflow plumbing.
Another thing I have found: Running on the Headhunter pump and filling the tank when needed keeps the pump active and the water in the tank fresh. Caution on letting the tank level get low enough to introduce air into the pump can cause a headache getting the air out!
Steve Bare's drawing is very helpful in locating the correct pipes.
Gordon Jones
Gordon Jones
2000-45'-2slide-#567