09-03-2021, 06:50 PM
I really shouldn't have coffee so late when i am not working! I got some artificial motivation and took the phantom wall down again to wire in the 120V lights on the mirror. And while I was at it I installed and mounted the new thermostat, but that's another thread!
The lights work great...however I am unsure if the outlet/line I tapped is inverter driven. I can always change it if it isn't. Will check tomorrow...maybe.
I also noticed that the phantom wall in the half bath is about 2 3/4" out from the actual wall. Looks like just two strips, one on either side that can be modified/replaced to decrease the space and give me enough room to open the left side door. Alternately, I may be able to shave a 45 deg or so angle at the edge, re-staple the leather and gain the clearance that way. Not tonight though!
The tiny lit circle at the bottom right of the right side door is the tap switch to turn the lights on/off.
The lights work great...however I am unsure if the outlet/line I tapped is inverter driven. I can always change it if it isn't. Will check tomorrow...maybe.
I also noticed that the phantom wall in the half bath is about 2 3/4" out from the actual wall. Looks like just two strips, one on either side that can be modified/replaced to decrease the space and give me enough room to open the left side door. Alternately, I may be able to shave a 45 deg or so angle at the edge, re-staple the leather and gain the clearance that way. Not tonight though!
The tiny lit circle at the bottom right of the right side door is the tap switch to turn the lights on/off.
Be seeing you,
Rick Miller
#423
1996, 45'+, Non-slide, Series 60, ABS, 1.5 Bath, Reverse Floorplan